MT INSTALL NB - 10/07
SAFLOK DOOR UNIT INSPECTION CRITERIA
Appearance
• Finish is free of blemishes or scratches that would distract from
lock appearance
• Lock body and underplate (if used) is mounted straight on the door
• Door scalp is mounted straight and flush with door edge
• Jamb strike is mounted straight and is flush with the jamb face
• Correction of minor blemishes on the door jamb are the responsibility
of the property’s maintenance department
Lock Function
• Knob or lever rotates and moves freely
• Lever is horizontal to floor when at rest position
• Dead bolt extends fully and retracts without binding (door open)
• Lock latch and dead bolt engage jamb strike plate freely
• Anti-pick latch locks latch when depressed (door open)
• Anti-pick latch is depressed when the contact is made with the
strike plate (door closed)
Electronics/Keycards
• Keycard can be inserted and withdrawn freely
• Yellow light flashes twice when incorrect keycard is used
• Double red flash if keycard is used wrong, so it cannot be read
(or wrong card is used, i.e. credit card)
• Green light appears when proper keycard is used
• Green light flashing when lever is operated
• Green light continues to flash for a five-second cycle
• Yellow light flashes 12 times when the dead bolt is extended and
guest/ hotel keycard is used
• Dead bolt release functions properly when “E” (emergency) key
is used
• All keycards function per specifications and property-designed
master plan
Door Function
• Door closes and latches with little or no interference
• Dead bolt extends fully through the strike plate without interference
(door closed)
• Spacing between door edge and inside door jamb does not exceed
3/16˝ (door closed)
Note: If bumpers or other seals are added after strike
plate installation and cause alignment and latch problems,
this becomes the property’s responsibility to correct (generally
applies to new construction or new door installation).
Questions? Contact Customer Service at 800.999.6213.
To Previous Page
Loading...
Need help?
General
