SVP/SVZ door locks
Mounting instructions
WN 059744 45532/14767
2020-03
EN
Contents
1 About this document 1
2 Safety 2
3 Product description 3
4 Mounting 8
5 Parameterization (SVP2000/2000F only) 15
6 Integrated Power Reserve module test
(SVP2000F) 18
7 Pin assignment 18
8 Complete mounting 19
9 Error messages 20
10 Maintenance 20
11 Disassembly and disposal 20
1 About this document
1.1 Contents and purpose
SVP/SVZ door locks are available in various designs
for tubular frame doors and for solid doors. This
manual describes mounting in tubular frame and solid
doors.
1.2 Target group
SVP/SVZ door locks must only be mounted by
technically qualified personnel.
1.3 Other applicable documents
• Manual for the connection cable SVP-A1100/2100
(not necessary for SVP5000)
• Mounting instructions for the components used, e.g.
the door handle
1.4 Abbreviations
SVP
Emergency lock with self locking
action
SVZ
Access control lock with
self locking action, without
emergency escape action
2000, 2000F,
4000, 5000,
6000
All versions of a door lock; the
exact lock type is marked with 3
digits instead of zeros.
TMS Soft®
Software for the dormakaba
door management system (TMS)
DCW® bus
DCW® is the short form for
"DORMA Connect & Work".
A dormakaba-owned fieldbus
system for the connection of up
to 4identical components to a
DCW® central unit.
CAN bus
Serial fieldbus system according
to ISO11898-3, for connecting
several components to one cable
harness
RR Tubular frame locks
VB Solid door locks
1.5 Symbols used
1.5.1 Hazard categories
WARNING
This signal word indicates a possible
hazardous situation which may result in
death or serious injury if not averted.
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
TIPS AND RECOMMENDATIONS
This signal word indicates useful information
for efficient and trouble-free operation.
1.5.2 More symbols
1. 2.
Sequence of action steps
1
2
Item numbers used in image
caption
To Next Page
Need help?
General
