Need help?Do you have a question about the Dormakaba Saflok SR1 and is the answer not in the manual?
General| Brand | Dormakaba |
|---|---|
| Model | Saflok SR1 |
| Category | Door locks |
| Language | English |
Requires additional hardware and cabling for connections to the mortise.
Specifies a 12-24V AC/DC power source with 125mA minimum current.
Defines acceptable placement for the RFID reader and controller box.
Details requirements for Messenger transceiver module and network connectivity.
Recommends 3 twisted pair x 22 AWG CMP cable, compliant with codes.
Refers to illustrations for door preparation and wire routing to the mortise.
Provides detailed dimensions for SR1 surface and SR2 flush mounting.
Lists mounting dimensions for various controller boxes.
Dimensions for SR2/SR3 standalone mounting for custom integration applications.
Guidelines for integrating SR2/SR3 for optimal reader performance and rules.
Provides a wiring schematic for the SR RFID Reader and SR Controller.
Illustrates mortise preparation and SR controller internal parts layout.
Details the methods for programming the SR RFID Concierge lock.
Lists all components included in the Saflok SR Concierge kit.
Outlines FCC and Industry Canada compliance statements for the device.
To Next Page