Dorner 2200 - Warnings - General Safety; Introduction

2200 Retro Fit Tails for 2100 Conveyors
Dorner Mfg. Corp.
2 851-461 Rev. A
The safety alert symbol, black triangle with white
exclamation, is used to alert you to potential
personal injury hazards.
Î
Î
WARNING
Î
Climbing, sitting, walking or
riding on conveyor will
cause severe injury.
KEEP OFF CONVEYORS.
DANGER
Î
DO NOT OPERATE
CONVEYORS IN AN
EXPLOSIVE ENVIRONMENT.
DANGER
Î
Exposed moving parts can
cause severe injury.
LOCK OUT POWER before
removing guards or
performing maintenance.
WARNING
Î
Gearmotors may be HOT.
DO NOT TOUCH Gearmotors.
WARNING
Î
Dorner cannot control the
physical installation and
application of conveyors.
Taking protective measures
is the responsibility of the
user.
When conveyors are used in
conjunction with other
equipment or as part of a
multiple conveyor system,
CHECK FOR POTENTIAL
PINCH POINTS and other
mechanical hazards before
system start-up.
WARNING
Î
Loosening stand height or
angle adjustment screws
may cause conveyor
sections to drop down,
causing severe injury.
SUPPORT CONVEYOR
SECTIONS PRIOR TO
LOOSENING STAND
HEIGHT OR ANGLE
ADJUSTMENT SCREWS.
WARNING
Introduction
IMPORTANT: Some illustrations may show
guards removed. Do NOT operate equipment with-
out guards.
Upon receipt of shipment:
D Compare shipment with packing slip. Contact facto-
ry regarding discrepancies.
D Inspect packages for shipping damage. Contact carrier
regarding damage.
D Accessories may be shipped loose. See accessory in-
structions for installation.
Dorner’s Limited Warranty applies.
Dorner 2100 Series conveyors are covered by Patent
No. 5,174,435, 5,131,529 and corresponding patents
and patent applications in other countries.
Dorner reserves the right to make changes at any time
without notice or obligation.
Warnings – General Safety