English
• New connection: Follow the steps below if your service provider is
not in the list. Contact your service provider for correct settings.
• Name to add account name.
• Username to add user name.
• Password to add password.
• Access point to add APN (Access Point Name).
• Auth type to specify the type of authentication to be used if your
service provider has an APN with user name and password.
• IP type to specify the protocol which the device must use to ac-
cess the Internet, through cellular data.
• Gateway to add a gateway proxy address.
• Port to add gateway proxy port.
• Homepage to add homepage.
• Advanced settings for more advanced settings:
• DNS address to add a DNS IP address for your service provider.
• Network type to set the network type. Select between WAP
and HTTP.
• Press Save when done.
• Search to search all available MMS accounts (APN).
• Delete to delete the selected MMS account (APN).
• Edit to edit the selected MMS account (APN).
4. Check/uncheck/select the functions as wanted.
• Delivery report to be notified when your multimedia message has
reached the recipient.
• Request read report to be notified when your multimedia message
has been read by the recipient.
• File storage select to save multimedia files on Phone or Memory-
Card (if installed).
• Memory status to display the memory space used on the selected
memory.
Cell broadcast
You can receive messages on various topics from your service provider,
such as weather or traffic conditions in a particular region. For available
channels and relevant channel settings, contact your service provider. Cell
broadcast messages cannot be received when the device is roaming.
24
To Next Page
Loading...
