English
plain alphabet characters, e.g. Î becomes I. Each message can contain
160 characters.
1. From SMS settings, select Input method:
• Automatic (default) to allow special characters.
• GSM alphabet to convert any special character to plain alpha-
bet characters.
• Information function description.
2. Press OK to confirm.
MMS settings
• Press Menu Settings Messages MMS settings.
Memory status
1. From MMS settings, select Memory status to display the memory
space used on the memory card (if inserted) and in the phone mem-
ory. Phone memory can store up to 8 MB.
2. Press Back to return.
Storage
Picture messages are saved by default in the phone memory. When the
memory becomes full you will need to either delete a picture message
(see Inbox, Outbox and Sent, p.25) or select to save your picture mes-
sages to the memory card. When the memory is full you will see a mes-
sage when you try to send or receive a picture message.
Note! Make sure to insert a compatible memory card before saving to it
(see Insert SIM card, memory card and the battery, p.1). The storage
menu only appears if you have inserted a card.
1. From MMS settings select Storage:
• Phone to store in the phone memory.
• Memory card to store picture messages to the memory card.
2. Press OK to confirm.
MMS profile
These settings are needed to use the picture messages function. The set-
tings for picture messages is supplied by your service provider and can
be sent to you automatically.
28
To Next Page
Loading...
