Doro Secure 580IUP - Confirm with 0; Signal Type

English
• Manual to send position when pressing the Assistance button.
• 2 hours between new search interval.
• 30 minutes between new search interval.
3. Press OK to confirm.
Tip: Use Doro Experience
®
Manager to edit Assistance settings using a
computer, see Assistance, p.18.
Confirm with "0"
Enable this function if there is a risk that the assistance call is answered
by a voicemail/answering service. If the receiver doesn’t press
0
within
60 seconds the call will be disconnected and the next number in the se-
quence will be called. If the receiver presses
0
within 60 seconds, the
call is confirmed and no further call attempts will be made (assistance
sequence interrupted).
1. Press and hold
.
2. Select Settings
Assistance Confirm with "0".
3. Select On to enable, or Off to disable.
4. Press OK to confirm.
Tip: Use Doro Experience
®
Manager to edit Assistance settings using a
computer, see Assistance, p.18.
Signal type
Select the notification signal type for the assistance sequence.
1. Press and hold
.
2. Select Settings
Assistance Signal type:
• High to use loud signals (default).
• Low to use one low signal.
• Silent no sound indication, like a normal call.
3. Press OK to confirm.
Tip: Use Doro Experience
®
Manager to edit Assistance settings using a
computer, see Assistance, p.18.
24