English
Request position
The request position function allows to receive the current position of the
Doro Secure
®
580IUP. Only numbers saved in the Number list can request
position.
Numbers list
1. Press and hold
.
2. Select Settings
Assistance Request position Number list
Empty Add.
3. Enter number and press OK to confirm.
4. Repeat until you have 5 contacts (maximum).
Tip: To edit or delete an existing entry, select it and press Options
Edit/Delete.
Request position
1. Make sure that the remote user is saved in the Number list.
2. Compose a text message with the text *#0# only.
3. Send the message to the Doro Secure
®
580IUP phone number.
4. The replying text messages contains date, time, and the positioning
information. Click the link to view position on a map.
Note! If the Doro Secure
®
580IUP is powered off, the latest known
position will be sent when powered on.
Tip: Use Doro Experience
®
Manager to set request position information
using a computer, see GPS request, p.20.
Safety timer
The safety timer is used to alert the numbers in the number list if not de-
activated within a set of time. See Number list, p.21.
Set time
1. Press and hold
.
2. Select Settings
Safety Timer Time.
3. Use the side buttons +/– to enter time, maximum 120 minutes.
4. Press OK to confirm.
Turn on/off sound
1. Press and hold
.
To Next Page
