Doro th50 - Making a call; Receiving a call; Temporary silent mode; Volume control

3
English
Making a call
1. Enter the required number.
2. Press
O
, and the number will be dialled. Press
L
to end the call.
Receiving a call
1. Wait for the handset to ring.
2. Press
O
to answer. Press
L
to end the call.
Please note!
To switch between handset/speaker press . Please remember that in speaker mode, it is only possible for one
person at a time to talk.
This product does not usually ring on the rst signal to allow correct matching to the phone book.
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to
connect to a line.
Temporary silent mode
When someone calls, you can press Silence to turn off the handset ring signal.
Volume control
The volume can be adjusted during a call with
}
/
{
.
Turning On/Off
Press and hold the
L
button for a few seconds to turn the handset off or on.
ConrmdisconnectionbypressingYes.
Redial
Press
{
and scroll through the 15 most recently dialled numbers using
{
/
}
. Press
O
.
Mute button
The microphone can be switched on/off during a call using
b
.
KeyGuard
The KeyGuard is turned off/on by pressing
#.
Paging
The handset will ring when
J
(onthebaseunit)ispressed.Thesignalwillstop
automatically after a while or if the
L
button on the handset or the
J
button on the base
unit are pressed.
Message button
Can be used when there is a new message in e.g. Caller ID or SMS.
Press the  button to access the different messages.