Dover markem imaje 9750 - G Head Cleaning Process; M Head Cleaning Process; Jet Stopped Status Screen; Head Cleaning Recommendation

19 10114437-AB
Head Maintenance
3
4
5
00:00:40
Jet stopped
Head operations
Jet status Stopped
Jet speed(m/s) 0
Ink pressure(bars) 3.05
Motor speed(rpm) 1500
Ink temperature(°C)
Head temperature(°C)
Printer counter(h)
Filter kit replacement
Jet start-up Unblock nozzle Additive intro Check stability Refreshment
119
128
0
15/04/2021
Viscosity reference 25.6
Viscosity 25.6
Recuperation level 0
Piezo value 260
Active phase number
Ink level(mm)
Ink circuit counter(h)
Maintenance kit replacement
0
100
0
14600
Jet stopped
31/12/2021
10:55 PM
Ok
1
2
Head operations
Jet status Stopped
Jet speed(m/s) 0
Ink pressure(bars) 3.05
Motor speed(rpm) 1500
Ink temperature(°C)
Head temperature(°C)
Printer counter(h)
Filter kit replacement
Jet start-up Unblock nozzle Additive intro Check stability Refreshment
119
128
0
15/04/2021
Viscosity reference 25.6
Viscosity 25.6
Recuperation level 0
Piezo value 260
Active phase number
Ink level(mm)
Ink circuit counter(h)
Maintenance kit replacement
0
100
0
14600
Back
Ready
31/12/2021
10:55 PM
When using certain inks or operating the printer in harsh environments (hot and/
or dusty environments), you will need to clean the head thoroughly. See user
manual or Sheet A47081.
G Head M Head
for parts & service call QLC (800) 837-1309