Dover ProGauge MagLink LX 4 - Introduction to Configuration Manual; Manual Compliance and Scope; Related Product Manuals

Section 4 General Indications
The MagLink LX 4 console is shipped in a cardboard box (L 450 x H 300 x D 200 [mm]) and includes the
components as follows:
l MagLink LX 4 console
l Connection cable (220 V AC with Schuko plug)
l Quality control certification checklist
l User manual, installation manual and web configuration manual
Weight of the console with its carton: 2 kg.
The table below shows the primary technical characteristics of the console:
Element Characteristic
Display
Display TFT 7inch
Dimensions 155 x 88 [mm]
Console
Dimensions
· Width 267 mm
· Height with cable: 215 mm
· Depth 80 mm
The illustration below shows the ports and connections on the bottom of the console:
Make sure that the power cable is correctly installed. Put the Power Switch to the on ("I") position to supply
power to the console.
Put the Power Switch in the off ("O") position to remove power from the console.
M2050 MagLink LX 4 Installation Manual | Dover Fueling Solutions 10