DR PILOT - Page 18

18 DR
®
PILOT™ LEAF and LAWN VACUUM
21. Lift the Outer Flap up and secure it to the Velcro on the Inner Flap. Repeat
for the other side (Figure 39).
22. Open up the Front Loop by pulling at the Velcro closures to separate them
(Figure 40).
23. Fold the Outer Flap over the Front Tube Frame and secure the Velcro next to
the Inner Flap (Figure 41).
24. Fold the inner Flap over the outer flap and secure the Velcro at the front
(Figure 42).
25. Slide the Enclosure Sleave over the Outlet Chute (Figure 43).
26. Tighten all hardware installed in steps 9 thru 17.
27. Separate the left and right side Doors by disconnecting the three Buckles
(Figure 44).
28. Separate the top and bottom Doors by disconnecting the three Buckles
(Figure 45).
Enclosure
Sleeve
Figure 43
Outlet
Chute
Buckle
s
Figure 45
Top
Bottom
Buckles
Figure 44
Left
Side
Right
Side
Figure 42
Inner
Flap
Velcro
Outer Flap
Figure 41
Inner
Flap
Velcro
1
2
Front Loop
with Velcro
Figure 40
Outer
Flap
Figure 39
Velcro