To Next Page

To Previous Page

15 DR POWERWAGON 5.0 Safety & Operating Instructions

Dumping

Note: For safety reasons, the DR POWERWAGON 5.0 bed is designed NOT to dump

automatically once the dump lever is released. You must pull the dump lever back then lift

the back of the bed to cause it to tip forward.

1. Pull the handle on the dump lever

straight out (Figure 9), then pull up

on the bed handle to dump the

load (Figure 10).

2. After unloading, push the bed

back down into place by hand.

Note: The bed of the DR

POWERWAGON 5.0 is balanced so

you can dump the load with minimal

effort. If you are carrying a very heavy

load, you may not be able to lift the

bed to dump it when you release the

latch lever. In this case, you will need

to manually remove part of the load

from the back of the bed, until the

load is light enough to allow the bed

to tip forward when you lift the bed

handle.

Figure 9

Figure 1

Pull lever to

release dump bed

Bed Handle

Important! Be sure the dump lever latches securely.

Questions and Answers:

Need help?

Do you have a question about the DR POWERWAGON 5.0 and is the answer not in the manual?

DR POWERWAGON 5.0 Specifications

General