DR Premier 375 - Setting Up Your Wood Chipper; Controls, Features, and Specifications

CONTACT US AT www.DRpower.com 9
Chapter 2: Setting Up the DR SELF-FEEDING WOOD CHIPPER
This chapter outlines assembly and a few simple steps you will need to follow to set up your new machine before you use it. It may
be helpful to familiarize yourself with the controls and features of your DR SELF-FEEDING WOOD CHIPPER as shown in Figure 1
before beginning these procedures. If you have any questions at all, please feel free to contact us at www.DRpower.com
or call our Customer Service Representatives at our toll-free number: 1-800-DR-OWNER (376-9637).
DR SELF-FEEDING WOOD CHIPPER Controls and Features
Figure 1
Discharge
Chute
Oil Fill/
Dipstick
Hopper
Assembly
Fuel Fill Cap
Chipper Knife
Inspection Cover
Belt Guard
Belt
Tensioner
Starter
Cord
Throttle
Lever
Choke
Lever
Pneumatic
Wheel
Fuel
Shutoff
Oil Drain
Blow-back
Shield
Transport
Handle
Stand
DISCHARGE SIDE
OPERATOR SIDE
Wear
Plate
Chipper
Knife
INSIDE HOPPER
Chipper Knife
Access Cover
On/Off
Switch