DR RAPID-FEED 16.50 PRO User Manual

16.50 PRO DR
®
RAPID-FEED™ CHIPPER
SAFETY & OPERATING INSTRUCTIONS
Chipper shown with
Optional Accessories
Serial No.
Order No.
READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING OR
SERVICING THIS 16.50 PRO DR RAPID-FEED CHIPPER.

DR RAPID-FEED 16.50 PRO Specifications

General

Brand	DR
Model	RAPID-FEED 16.50 PRO
Category	Chipper
Language	English

Summary

General Safety Rules

Protecting Yourself and Those Around You

Crucial safety precautions for operating the chipper safely.

Safety for Children and Pets

Guidelines to prevent accidents involving children and pets.

Safety with Gasoline - Powered Machines

Safety precautions specific to operating gasoline-powered equipment.

Towing Safety

Safety instructions for towing the chipper, especially with the optional package.

General Safety

Broad safety advice for operating the chipper responsibly.

Setting Up Your 16.50 PRO DR RAPID-FEED CHIPPER

16.50 PRO DR RAPID-FEED CHIPPER Controls and Features

Unpacking the 16.50 PRO DR RAPID-FEED CHIPPER

Connecting the Battery Cable (Electric Start)

Adding Engine Oil and Gasoline

Instructions for filling the engine with oil and the fuel tank with gasoline.

Operating Your 16.50 PRO DR RAPID-FEED CHIPPER

Before Starting the Engine

Pre-operation checks and steps to ensure the chipper is ready to start.

Operation Notes

Processing Material

Guidance on how to feed and chip various types of wood material effectively.

Starting the Engine (Manual –Starting Chipper)

Step-by-step instructions for starting the engine using the manual pull-start.

Starting the Engine (Electric–Starting Chipper)

Step-by-step instructions for starting the engine using the electric start.

Stopping the Engine

Procedures for safely shutting down both manual and electric start engines.

To Free a Jammed Flywheel

Maintaining the 16.50 PRO DR RAPID-FEED CHIPPER

Regular Maintenance Check List

A checklist of routine maintenance tasks and their intervals.

Removing and Replacing the Engine Oil

Removing, Replacing and Adjusting the Drive Belt

Removing, Replacing and Adjusting the Chipper Knife and Wear Plate

Procedures for knife and wear plate maintenance and adjustment.

Inspecting the Chipper Knife and Wear Plate

Removing and Replacing the Wear Plate

Checking and Adjusting the Knife to Wear Plate Gap

How to set the correct clearance between the knife and wear plate.

Removing and Replacing the Clutch

End of Season and Storage

Troubleshooting

Troubleshooting Table

A guide to diagnosing and resolving common problems with the chipper.

Parts List and Schematic Diagrams

Daily Checklist for the 16.50 PRO DR RAPID-FEED CHIPPER