CONTACT US AT www.DRpower.com or CALL TOLL FREE 1-800-DR-OWNER 53
ackage
hipper to be
in Shipping Box (Figure 51):
• Highway Tongue Assembly
ies
•
52):
− Hardware Package (Table below and Figure
53)
1. the
2. ge and lay out the Parts.
3. Open the Hardware Package and lay out the
Hardware.
4. Compare the contents of the Shipping Box, Parts Box
and Hardware Package with the Parts Supplied list
above. If there are any questions contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-
9637). Do not discard the shipping materials until you
are fully satisfied with your new Road-Towing Package.
I
TEM #
Road-Towing P
The Road-Towing Package enables the C
towed behind a vehicle that is equipped with a 2" ball hitch
and transported on public roads to another site.
Unpacking the Road-Towing Package
Tools and Supplies Needed:
• Knife
Parts Supplied
• Two Wheel Assembl
Two Fenders
• Axle Assembly
• Parts Box containing (Items below and Figure
− Two Tail Lights with Brackets
− Wire Harness
− Wire Ties
Cut the Box open and with a knife and place
contents on a clean level surface.
Open the parts Packa
DESCRIPTION
QTY
1 Dust Ca
2
2 Castle Nut 2
3 3
8-16 X 1-1
4" Bolts 4
4 3
8-16 N
lon Lock Nuts 4
5 3
8" Flat Washer 2
6 Cotter Pin 2
7 5
16-18 X 1" Bolt 4
8 5
16-18 N
lon Lock Nut 4
Wheel
Assembly
Fender
Axle
Assembly
Parts
Tongue
Assembly
Package
Figure 51
Figure 52
Hardware
Package
Wire Ties
Harness
Tail Lights
Wire
Figure 53
6
5
1
3
4
2
7
8
To Next Page
Loading...
Need help?
General
