DR RAPID-FEED 16.50 PRO User Manual

24 16.50 PRO DR
®
RAPID-FEED™ CHIPPER
Start
1. Fuel Shut-Off Valve is in the “ON”
2.
e
3. Move the Throttle Control Lever to about half way
between Slow and Fast position (Figure 17).
the “Run” position (Figure 16). Wait until the engine
runs smoothly before each Choke adjustment.
6. When the Engine is warmed up and running smoothly
rol Lever to the fast position (rabbit icon)
ing the Engine (Manual –Starting Chipper)
Ensure that the
“RUN” “CHOKE”
Choke
Control
Lever
position (Figure 14).
Move the Choke Control Lever to the “CHOKE”
position (Figure 16) (leave in the RUN position if th
engine is already warm).
Figure 16
Th
Control
Lever
Figure 17
rottle
Slow
Fast
Key
Switch
Figure 18
Starter
Cord
4. Insert the Key into the key switch and slowly pull the
Starter Cord until you feel resistance, then pull quickly
(Figure 18). The Cord will recoil back into position.
5. As the engine warms up, slowly adjust the Choke to
with the Choke in the “RUN” position, move the
Throttle Cont
for chipping.

DR RAPID-FEED 16.50 PRO Specifications

General

Brand	DR
Model	RAPID-FEED 16.50 PRO
Category	Chipper
Language	English