What to do if DR Trimmer motor fails to start?
If the DR Trimmer motor isn't starting, ensure the Battery Pack is correctly installed and fully charged. Also, make sure to fully push in the Auto-Lock-Button before squeezing the Trigger Switch.
Why is my DR PRO-62V Trimmer battery pack not charging?
If your DR Trimmer battery pack isn't charging, ensure it's fully inserted into the charger until the Green LED Light comes on. Also, verify the charger is plugged into a working outlet using a lamp or other appliance. Check that the outlet isn't controlled by a wall switch. Finally, the surrounding air temperature may be too hot or cold. Move the Charger and Battery Pack to a location where the temperature is between 50ºF (10ºC) and +100ºF (+37.8ºC).
Details appropriate attire, safe handling, and operational guidelines to prevent accidents.
Explains kickback phenomena and how to operate the chainsaw's safety chain brake.
Covers starting procedures, proper body positioning, and essential cutting techniques.
Guides on adjusting chain tension and maintaining the guide bar for optimal performance.
Explains how to sharpen the chainsaw chain and adjust the depth gauge for effective cutting.
A table listing common issues with the chainsaw and their potential causes and solutions.
General| Engine | Electric |
|---|---|
| Power Source | Battery |
| Voltage | 62V |
| Battery Type | Lithium-Ion |
| Line Diameter | 0.080 inches |
To Next Page
