Draeger Interlock XT - Rolling Retest

User Manual • October 2004 Page 9
DRAEGER INTERLOCK
®
XT
ROLLING RETEST
What is a Rolling Retest?
To make sure you stay sober while driving, the Interlock requires you to take additional tests
while you drive. You must give additional breath tests at random intervals – perhaps several times
before you turn off your vehicle. (See back cover for how often you will take the Retest.)
• When the Interlock prompts for a Retest, you will hear a beep and the yellow light will ash.
• The Interlock will display "Retest required - PLEASE BLOW".
• Take the breath test exactly as you do when you start your vehicle.
• Give the Retest within the specied time.
• When you see "TEST PASSED", put the device back on the Hook and Loop Tape and
continue your trip.
• The "Drive Safely!" message will return to the display and remain on the display for the
duration of the trip or until the next random Rolling Retest.
What happens if I just turn my vehicle off during the Retest?
• Once the device asks for a Retest, you must take the Retest.
• A violation will be recorded if you don’t take the Retest in the time allowed.
What happens if I don’t hear the Retest prompt?
• At certain times, the Interlock's buzzers will start beeping continuously to alert you.
• To stop the buzzers, press the OK button and take the Retest.
What happens if I don’t take the Retest in time?
• The message "Retest VIOLATION" will be displayed.
• The Interlock's buzzers will beep continuously.
• The vehicle’s horn may repeatedly honk and/or the headlights may continuously ash.
• You must pass the Retest or turn off the vehicle in order to deactivate the horn and/or lights.
REMEMBER
You have several minutes to take the Retest. If you are in heavy trafc or on a
dangerous section of road, wait to take the test until you can safely follow correct testing
procedures. For safety reasons and certain road laws, you may choose to pull over
at the Retest prompt, and park the vehicle off the road (away from trafc in a safe position).
Leave the motor running during the Retest.