Dräger Babylog 8000 plus - Page 33

Instructions for use Babylog 8000 plus SW 5.n 33
Operating concept
Dialog windows
Dialog window layout
A Graphic field, displays the pressure waveform
or flow waveform
B Measured value field, numeric display of
measured values
C Status field, displays the current ventilation
mode and other status information
D Row displaying the current assignments of the
6 variable keys under the screen
Opening dialog windows
The dialog windows can be opened using the
following keys:
– Keys with fixed functions
– Vent. Mode
– Vent. Option
– Cal. Config.
– 6 keys with variable functions
 Press a key to open the associated dialog
window.
Main screen
The main screen is displayed after the device is
switched on.
The following information is displayed on the main
screen:
– Pressure waveform or flow waveform
– 3 measured values
– Ventilation mode
– Assignment of the 6 variable keys
The measured values to be displayed can be
selected, see page 87. The waveform to be
displayed can be selected, see page 87.
The set pressure limitation Pinsp (A) is displayed
in the pressure waveform. The set expiratory time
TE (B) is displayed in the pressure and flow
waveforms.
21629
A
B
C
D
20923
A B