Dräger Babylog 8000 plus - Setting Ventilation Parameters

Instructions for use Babylog 8000 plus SW 5.n 63
Operation
Setting ventilation
Ventilation is set using the keys and setting knobs
on the device and in the dialog windows. The
settings can be made during ventilation. A detailed
description of the process can be found in chapter
''Operating concept'' on page 28.
Ventilation modes and ventilation parameters
A detailed description of the ventilation modes and
ventilation parameters can be found in chapters
''Description of ventilation modes'' on page 156
and ''Additional settings for ventilation'' on
page 161.
SIMV, SIPPV, and PSV ventilation modes
If the patients becomes apneic, ventilation begins
with the respiratory rate specified by T
I and TE.
Ventilation parameters Ventilation mode
Location of setting
control
CPAP IPPV/IMV SIMV SIPPV PSV
Setting knobs on
device
O
2-Vol.% XXXXX
T
I XXXXX
T
E XXXXX
XXXXX
Pinsp XXXXX
PEEP/CPAP XXXXX
Options dialog win-
dow
Trigger XXX
Options > VIVE dia-
log window
XXXXX
Options > VG dialog
window
Vtset XXX
Options > HFV dialog
window
Frequ. XX
Ampl. XX
Insp. Flow
ex