To Next PageTo Next PageWhy doesn't the LED on my Dräger Quaestor 5000 power supply light up?
If the LED on the power supply unit of your Dräger Test Equipment doesn't light up, the power pack may be faulty. In this case, contact service personnel.
What to do if Dräger Test Equipment is not recognized by PC software?
If your Dräger Test Equipment isn't being recognized by the PC software, there could be a couple of reasons. First, the USB cable might be faulty; try using a new cable. If that doesn't solve the problem, the test device itself might be faulty, and you should contact service personnel.
Why does my Dräger Quaestor 5000 Test Equipment make a hissing sound?
If your Dräger Test Equipment makes a hissing sound when switched on, it might be faulty. Contact service personnel.
General| Power Supply | 100 - 240 V AC, 50/60 Hz |
|---|---|
| Testing Capacity | self-contained breathing apparatus (SCBA), chemical protective suits |
| Gas Supply | External compressed air supply |
| Data Logging | Yes |
| Storage Temperature | -10 °C to +50 °C |
| Dimensions | 450 mm |
