Dräger Savina Short Guide

© Drägerwerk AG & Co. KGaA, 2019
Savina – Getting started
Start therapy
Select the ventilation mode
1. To select the ventilation mode press the corresponding key;
press the rotary knob to confirm
or
press the corresponding key for at least 3 seconds.
Set the ventilation parameter
2. To set ventilation parameters press the corresponding key. Turn
the rotary knob to the right or left to change a setting and
confirm by pressing the rotary knob
Adjust the alarm limits
3. Open the Alarms dialog window. Select the alarm limit with the
rotary knob and confirm with the rotary knob. Set the value by
turning the rotary knob and confirm with the rotary knob.
Start ventilation
4. Press the Standby key. Savina starts the therapy with the set
ventilation parameters.
25
1
1
2
2
2
3
3
4

Dräger Savina Specifications

General

FiO2	21 - 100 %
Ventilation Modes	CPAP/ASB
Display	Color
Power Supply	100 – 240 V AC, 50/60 Hz
Patient Range	Adult, Pediatric, Neonatal
Tidal Volume Range	20 to 2000 mL
Screen Size	12.1 inch
Inspiratory Time	0.1 - 10 s