TTIC Orientation/Greg Sesny/5/25/0821 | 37
Mode Button Functions
Mode Button
The UCF 1600 and the UCF 3200 thermal
cameras mode button is located on the right
side of the camera control panel. The button
that has an “M” on it.
• To activate the different Color Palette modes,
press and hold the “M” button for 1 ½ to 2
seconds
•An icon will appear in the lower left side of the
screen to tell the user what Color Palette they
are currently in.
*Note: If the camera goes into an area of high
heat to where the camera goes into EI mode, the
camera will automatically default to CP01.
To Next Page
Loading...
