Draper 37317 - Product Introduction; Intended Use; Specification

– 4 –
EN
3. Product Introduction
3.2 Specication
Stock No. 37317
Part No. AMM1
Multimeter rating CAT II
Dimensions W 62 x H 102 x D 35mm
Battery 1 x 1.5V AA (Not supplied)
Weight 125g
Circuit protection 500mA/250V fuse
DC voltage
Input impedance 10KΩ/V
Measurement range 2.5, 10, 50, 250, 500V
Accuracy ±0.5%
AC voltage
Input impedance 4.5KΩ/V
Measurement range 10, 50, 250, 500V
Accuracy ±0.5%
DC current
Measurement range 500µA, 10mA, 250mA
Accuracy ±0.5%
Resistance
Measurement range 2kΩ, 200kΩ (centre scale 3.6)
Battery test range 1.5V, 9V
Pollution degree II
Operating conditions
Ambient operating temperature 0–50°C
Ambient operating humidity <80%
3.1 Intended Use
This device is designed to measure voltage, current and
resistance across AC and DC circuits. It may also be used
to test the voltage of 1.5V and 9V batteries. Any other
application beyond the conditions established for use
will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
Part of our core range, this product is suitable for regular
use by enthusiasts and tradespersons alike.
WARNING! This product is not a toy and must
be respected.
Read this manual in full before attempting to assemble,
operate or maintain the product and retain it for later use.