Draper 78774 - Maintenance and Disposal; Explanation of Symbols

20
min
REFILLABLE
5. MaintenanceandDisposal
WARNING!ALWAYSensurethatthecontrollever
is in the OFF position and that the soldering iron is
completelycoolbeforemaintainingorstoringthe
product.
• Keep the barrel clean and dry.
− Use a dry cloth ONLY to clean the barrel.
− Clean the soldering tip using a wet sponge while the
tip is hot.
WARNING!Takecarenottotouchanypartofthe
headassemblywhilethesolderingtipishot.
− DO NOT use solvents or other aggressive chemicals
to clean the product as they may damage plastic or
insulated parts.
• Keep the air vents of the barrel free from dust and
obstructions.
• Store the product in a clean, cool and dry location, out
of direct sunlight and out of reach of children.
• At the end of its working life, dispose of the product
responsibly and in line with local regulations. Recycle
where possible. Exhaust the fuel before disposing of the
product and dispose of butane separately and
responsibly.
6. ExplanationofSymbols
Read the instruction leaet
Max. potential operating time per refuel
Operating temperature
Rellable gas
Keep out of the reach of children
200°C
400°C
–