Need help?Do you have a question about the Drawmer DS201 and is the answer not in the manual?
General| Dynamic Range | >110dB |
|---|---|
| Ratio | 1:1 to ∞:1 |
| Type | Dual-channel Noise Gate |
| Total Harmonic Distortion | <0.01% @ 1kHz, +20dBu |
| Signal to Noise Ratio | >90dB |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Power Supply | 50/60Hz |
| Dimensions | 483 x 44 x 200mm (19” x 1.75” x 7.9”) |
Attenuates frequencies below the selected cut-off frequency.
Attenuates frequencies above the selected cut-off value.
Sets the level at which the gate opens.
Determines how quickly the gate opens.
Sets the time the gate remains open after signal falls below threshold.
Determines the rate at which the gate closes.
To Next Page