Vigor2800 Series User’s Guide
145
Authentication Check this box to activate this function. Some servers
might need user name and password for authentication.
Therefore, activate this mechanism is required.
User Name Thye the user name for the authentication.
Password Type the password for the authentication.
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC’s IP address in the field of Server IP Address
2. Install the Router Tools in the Utility within provided CD. After installation, click on
the Router Tools>>Syslog from program menu.
3. From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
To Next Page