Vigor160 Series User’s Guide
148
The web user interface will be open until you click the
Logout icon manually.
Internet Access Control Allow management from the Internet - Enable the checkbox
to allow system administrators to login from the Internet.
There are several servers provided by the system to allow
you managing the router from Internet. Check the box(es) to
specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
LAN Access Control Allow management from the LAN - Enable the checkbox to
allow system administrators to login from LAN side. There are
several servers provided by the system to allow you
managing the router from Internet. Check the box(es) to
specify.
Apply To Subnet - Check the box(es) to apply the control to
selected LAN port and/or IP routed subnet.
Access List from the
Internet
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
Apply Access List to PING - The behavior of this feature is
related to the function of Disable PING from the Internet.
When Disable PING from the Internet is disabled
(unchecked) and Apply Access List to PING is enabled
(checked), Vigor router will ping only the IPs list below
(index in IP Object). When both Disable PING from the
Internet and Apply Access List to PING are disabled
(unchecked), Vigor router allows ping job of any IP.
List IP - Indicate an IP address allowed to login to the
modem.
Subnet Mask - Represent a subnet mask allowed to login to
the modem.
Management Port Setup User Define Ports - Check to specify user-defined port
numbers for the Telnet, HTTP, HTTPS, FTP, TR-069 and SSH
servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
SNMP Setup Enable SNMP Agent - Check it to enable this function..
Get Community - Set the name for getting community by
typing a proper character. The default setting is public.
Set Community - Set community by typing a proper name.
The default setting is private.
Manager Host IP - Set one host as the manager to execute
To Next Page
Loading...
Need help?
General
