Draytek Vigor 2925 Series User Manual

Vigor2925 Series User’s Guide
192
4
4
.
.
2
2
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
This page provides you the general settings for LAN. Click LAN to open the LAN settings
page and choose General Setup.
There are four subnets provided by the router which allow users to divide groups into different
subnets (LAN1 – LAN5). In addition, different subnets can link for each other by configuring
Inter-LAN Routing. At present, LAN1 setting is fixed with NAT mode only. LAN2 – LAN5
can be operated under NAT or Route mode. IP Routed Subnet can be operated under Route
mode.
Note: LAN5 is not supported by Vigor2925F/Vigor2925Fn.
Available settings are explained as follows:
Item Description

Draytek Vigor 2925 Series Specifications

General

VPN Tunnels	50
Firewall Throughput	900 Mbps
Load Balancing	Yes
QoS	Yes
Wireless	No
Power over Ethernet (PoE)	No
USB Ports	2
VPN Protocols	PPTP, L2TP, IPSec, SSL VPN
Routing Protocols	RIP, BGP
LAN Ports	5