Vigor2925 Series User’s Guide
401
4
4
.
.
1
1
4
4
.
.
4
4
L
L
o
o
g
g
&
&
A
A
l
l
e
e
r
r
t
t
This page offers brief information to identify the CPE connected to Vigor2925 series.
Available settings are explained as follows:
Item Description
Display Mode
Choose the mode you want to display the related information
on the following table.
Stop record when fulls – when the capacity of CVM log
is full, the system will stop recording.
Always record the new event – only the newest events
will be recorded by the system.
Device Name
Display the name of the managed CPE.
Description Name
Display the brief explanation for the managed CPE.
Time & date
Display the time and date that the managed CPE scanned by
Vigor2925 series.
Action Type
Display the action that Vigor2925 series will perform for the
managed CPE.
Message
Display the information for each event.
The Alert page offers brief information to identify the CPE connected to Vigor2925 series.
To Next Page
Loading...
Need help?
General
