Vigor2120 Series Quick Start Guide
17
Quick Start Wizard can help you to deploy and use the router quickly. The
first screen of Quick Start Wizard is entering login password. After typing
the password, please click Next.
On the next page as shown below, please select the WAN interface that you
use. If Ethernet interface is used, please choose WAN1; if 3G USB modem
is used, please choose WAN2. Then click Next for next step.
WAN1 and WAN2 will bring up different configuration page. Refer to the
following for detailed information.
To Next Page
Loading...
Need help?
General
