Draytek Vigor2830N User Manual

Vigor2830n V2 Quick Start Guide
3
Off The port is disconnected with
10/100Mbps when left LED is on.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with
1000Mbps.
WAN2
(Giga)
Right LED
(Green)
Off The port is disconnected with
10/100Mbps when left LED is on.
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED off)
wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default
configuration.
USB Connecter for a USB device (for 3G/4G USB Modem or
printer).
DSL Connecter for accessing the Internet through ADSL2/2+.
WAN2(Giga) Connecter for remote network devices.
GigaLAN
(1-4)
Connecters for local network devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Draytek Vigor2830N Specifications

General

Brand	Draytek
Model	Vigor2830N
Category	Firewall
Language	English