3
On The port is connected with 1000Mbps.
Right LED
Off The port is connected with 10/100Mbps.
LAN P1-P5
On The port is connected.
Off The port is disconnected.
Left LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Right LED
Off The port is connected with 10/100Mbps
Interface Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
USB
Connecter for a USB device (for 3G/4G USB Modem or printer
or thermometer).
WAN2 / P6
Connecter for local network devices or modem for accessing
Internet.
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
LAN P1-P5
Connecters for local network devices.
DSL Connecter for accessing the Internet.
PWR Connecter for a power adapter.
ON/OFF Power Switch.
Connecter for installing LTE antennas.
SIM Card Slots for installing SIM card(s).
To Next Page
Loading...
