6
Interface Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the
button pressed and released. For example,
2.4G (On) and 5G (On) – in default.
2.4G (Off) and 5G (On) – pressed and released the button
once.
2.4G (On) and 5G (Off) – pressed and released the button
twice.
2.4G (Off) and 5G (Off) – pressed and released the button
three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client’s device
making
network connection through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT
LED is blinking). Press the hole and keep for more than 5
seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
USB1~2 / USB
Connecter for a USB device (for 3G/4G USB Modem or printer
or thermometer).
WAN2 / P6
Connecter for local network devices or modem for accessing
Internet.
To Next Page
Loading...
Need help?
General
