Vigor2912 Series Quick Start Guide
3
Interface
Description
PWR
Connecter for a power adapter.
ON/OFF Power Switch.
USB Connecter for a USB device (for 3G USB Modem or
printer).
W1~W2/P1 Connecter an ADSL or cable modem for accessing
Internet (WAN).
W2/P1~P4 Connecters for local network devices (LAN).
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
To Next Page
Loading...
Need help?
General
