Vigor2912 Series Quick Start Guide
5
Interface Description
PWR
Connecter for a power adapter.
ON/OFF Power Switch.
USB Connecter for a USB device (for 3G USB Modem or
printer).
W1~W2/P1 Connecter for local network devices or modem for
accessing Internet (WAN).
W2/P1~P4 Connecters for local network devices (LAN).
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED
off) wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
To Next Page
Loading...
Need help?
General
