Draytek Vigor2927 User Manual

6
4
4
.
.
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
To access Internet, please finish basic configuration after completing the
hardware installation.
The Quick Start Wizard is designed for you to easily set up your router for
Internet access. You can directly access the Quick Start Wizard via Web User
Interface. Make sure your PC connects to the router correctly.
Note You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the
same subnet as the default IP address of Vigor router
192.168.1.1. For the detailed information, please refer to -
Trouble Shooting of the user’s guide.
Open a web browser on your PC and type http://192.168.1.1. A pop-up window
will open to ask for username and password. Please enter “admin/admin” as the
Username/Password and click Login.
Note If you fail to access to the web configuration, please go to
“Trouble Shooting” on User’s Guide for detecting and solving
your problem.

Draytek Vigor2927 Specifications

General

WAN Ports	2
WAN Type	Ethernet
VPN Support	Yes
Firewall	Yes
USB Ports	2 x USB 2.0
Concurrent VPN Tunnels	50
VLAN Support	Yes
QoS	Yes
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Wireless Support	No (available on Vigor2927ac and Vigor2927Vac models)
VPN Throughput	200 Mbps
Processor	Dual-Core
Power Supply	12V DC
LAN Ports	5 x Gigabit Ethernet
Memory	512 MB