Draytek Vigor2927 User Manual

3
Interface Description
Factory
Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart
with the factory default configuration.
USB
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
WAN1
Connecter for local network devices or modem for
accessing Internet.
WAN2 / P6
Connecter for local network devices or modem for
accessing Internet.
It is a switchable port. It can be used for LAN connection or
WAN connection according to the settings configured in
WUI.
LAN P1-P5 Connecters for local network devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Draytek Vigor2927 Specifications

General

WAN Ports	2
WAN Type	Ethernet
VPN Support	Yes
Firewall	Yes
USB Ports	2 x USB 2.0
Concurrent VPN Tunnels	50
VLAN Support	Yes
QoS	Yes
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Wireless Support	No (available on Vigor2927ac and Vigor2927Vac models)
VPN Throughput	200 Mbps
Processor	Dual-Core
Power Supply	12V DC
LAN Ports	5 x Gigabit Ethernet
Memory	512 MB