Vigor2960 Series Quick Start Guide
17
S
S
t
t
e
e
p
p
2
2
After clicking Next, you can see the following page which will vary according to the IPv4
protocol type selected in Step 1.
z For Static type, the page will be displayed as follows:
Available settings are explained as follows:
Item Description
IP Address
Type the IP address of the router for the WAN profile.
Subnet Mask
Type the network mask of the router for the WAN profile.
Gateway IP Address
Use the default setting (0.0.0.0). Such IP address is ready for
matching with the function of Virtual System.
DNS Server IP
Address
Type a public IP address as the primary DNS (Domain Name
Server). To add a new IP address, simply Add. Four boxes
will appear for you to type the IP address. When you finish
the settings, click Save.
To Next Page
Loading...
Need help?
General
