4
VigorLTE 200,
VigorLTE 200n,
Interface Description
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
SIM2/SIM1
SIM card slot(s).
P2-P1
Connecters for local network devices.
ON/OFF Power Switch.
PWR Connecter for a power adapter.
To Next Page
Loading...
