Need help?Do you have a question about the Draytek VigorSwitch G1280 and is the answer not in the manual?
General| Switching Capacity | 56 Gbps |
|---|---|
| Weight | 3.2 kg |
| Power Input | 100-240V AC, 50/60Hz |
| SFP Ports | 4 |
| MAC Address Table | 16K |
| Jumbo Frame | 9K |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Forwarding Rate | 41.7 Mpps |
Provides essential safety guidelines for setting up and operating the switch, including environmental precautions.
Details the product warranty terms, coverage, and limitations for the VigorSwitch.
Outlines FCC compliance rules, potential interference, and user guidance for radio frequency emissions.
Explains the status and meaning of various LEDs (PoE, System, Power, Link/Activity) on the switch.
Identifies and describes the different ports (RJ45, Combo, SFP) and their connectivity on the switch.
Details how to connect PoE devices and other network devices to the switch using Ethernet cables.
Provides instructions for installing the switch in a rack using the provided mounting kit and screws.
Guides users through setting up the switch's IP address and accessing it via a web browser.
Shows the main dashboard of the VigorSwitch web interface, displaying system status and information.
To Next Page