Need help?Do you have a question about the Draytek VigorSwitch G2080 and is the answer not in the manual?
General| Switching Capacity | 16 Gbps |
|---|---|
| Forwarding Rate | 11.9 Mpps |
| MAC Address Table Size | 8K |
| Jumbo Frame | Up to 9K bytes |
| Power Supply | External Power Adapter |
| Humidity | 10% to 90% non-condensing |
| Input Voltage | 100-240 VAC |
| Ports | 8 x Gigabit Ethernet ports |
| Management | SNMP |
| Power over Ethernet | Not supported |
| Operating Temperature | 0°C |
| Storage Temperature | -20°C to 70°C |
Introduces the VigorSwitch G2080 and its capabilities.
Lists the key hardware and management features of the switch.
Guides on installing the switch and its components.
Manages and monitors switch ports.
Configures Quality of Service settings for traffic prioritization.
Configures VLANs for network segmentation and security.
Configures Spanning Tree Protocol to prevent network loops.
Configures link aggregation for increased bandwidth.
Implements port-based network access control using 802.1X.
Details the process of upgrading the switch's firmware using TFTP.
To Next Page
