VigorSwitch G2080 User’s Guide
109
2
2
.
.
2
2
2
2
F
F
i
i
r
r
m
m
w
w
a
a
r
r
e
e
U
U
p
p
g
g
r
r
a
a
d
d
e
e
Software upgrade tool is used to help upgrade the software function in order to fix or
improve the function. The switch provides a TFTP client for software upgrade. This can be
done through Ethernet.
Function name:
Firmware Upgrade
Function description:
The switch supports TFTP upgrade tool for upgrading software. If you assure to upgrade
software to a newer version one, you must follow two procedures:
1. Specifying the IP address where TFTP server locates. In this field, the IP address of
your TFTP server should be filled in.
2. Specifying what the filename and where the file is. You must specify full path and
filename.
Then, press <Upgrade> button if your download is not successful, the switch will also be
back to “Software Upgrade”, and it will not upgrade the software as well.
When download is completed, the switch starts upgrading software. A reboot message will
be prompted after completing upgrading software. At this time, you must reboot the switch
to have new software worked.
Note: Software upgrade is hazardous if power is off. You must do it carefully.
Parameter description:
TFTP Server: A TFTP server stored the image file you want to upgrade.
Path and Filename: File path and filename stored the image file you want to
upgrade.
To Next Page
Loading...
Need help?
General