Need help?Do you have a question about the Draytek VigorSwitch P1280 and is the answer not in the manual?
Guides users on how to install the VigorSwitch P1280, covering various application scenarios and physical mounting.
Provides step-by-step instructions to access and log in to the VigorSwitch P1280's web management interface.
Covers the essential IP address parameters (IP, Subnet Mask, Gateway, DNS) required for network configuration.
Configures basic network settings for the switch, including IP address and gateway for remote management.
Details how to configure static or DHCP IP address, subnet mask, gateway, and DNS for the VigorSwitch.
Configures the VLAN ID for management access, ensuring secure access via specific protocols like HTTP, HTTPS, and SNMP.
Configures individual port settings such as speed, duplex mode, and flow control for the VigorSwitch.
Manages Virtual Local Area Networks (VLANs), allowing users to create, edit, or delete VLAN profiles and settings.
Guides on adding, editing, or deleting VLAN settings, including defining VLAN IDs, names, and types.
To Next Page
General