Dreadbox TYPHON - List of CCs; Calibration and Hardware Check; 11 MIDI Implementation

10.9 List of CC’s
This is just a list of midi CCs for reference, which can’t be edited.
10.10 Calibration and hardware check
To be updated
11. MIDI implementation
Typhon can accept the following MIDI messages:
- Note ON/OFF
- Note Number
- Aftertouch
- Velocity
- Modulation Wheel
- Pitch Bend
For Firmware version 1.0 , MIDI over USB will not be available. This is expected on September 2020.
Here is a list of the current open CC orders. This will be continuously upgraded with every Firmware update
release. Expect a full MIDI implementation on September 2020.
TARGET VALUE CC No#
MOD WHEEL 0-127 1
CC2 0-127 2
OSC2 OFFSET 0-127 8
CUTOFF 0-127 4
RESONANCE 0-127 3
WAVESHAPE 0-127 6
GLIDE 0-127 5
VCO LEVEL 0-127 7
FILTER EG ATTACK 0-127 23
FILTER EG DECAY 0-127 24
FILTER EG SUSTAIN 0-127 25
FILTER EG RELEASE 0-127 26
FILTER TIME 0-127 27
EG LEVEL 0-127 28
VCA EG ATTACK 0-127 29
VCA EG DECAY 0-127 30
VCA EG SUSTAIN 0-127 31
VCA EG RELEASE 0-127 33
VCA EG TIME 0-127 34
16