DREAM MULTIMEDIA Dreambox DM 100

Need help?

Do you have a question about the DREAM MULTIMEDIA Dreambox DM 100 and is the answer not in the manual?

Summary

Before Initial Operation of the Receiver

Safety Instructions

Essential safety guidelines for operating the Dreambox, including ventilation, liquid avoidance, and electrical precautions.

Installation

Turning the Device On

Step-by-step instructions for connecting and powering on the Dreambox for the first time.

Start Wizard

Language Selection

Basic Operation

Turning Your Dreambox On and Off

Main OSD Menu

Electronic Program Guide - EPG

Edit the Channellist

Channel List

Edit Channels

Edit Favorites

Parental Control

Setup

Language

A;V Settings

Factory Reset

Service Searching

Select the Satellite

Allows selection of satellites to be scanned for available TV and radio channels.

Setting Antenna Setup

Configuration of LNB, 22KHz, DiSEqC type, port, and motor settings.

Automatic Transponder Scan

Performs an automatic scan of a preset list of transponders for new channels.

Manual Transponder Scan

Scans a single transponder manually by specifying frequency, symbol rate, and polarity.

PID Transponder Scan

Scans for specific PIDs within a transponder for channel identification.

Blind Transponder Scan

Scans the entire possible range of transponders to find all available services.

Channel Scan

Initiates the final channel scan process after transponder selection and saves found channels.

DiSEqC 1.2

Configures the motor for DiSEqC 1.2 control to move the satellite dish.

USALS

Edit Transponder