DREAM MULTIMEDIA Dreambox DM 600 PVR

Questions and Answers

M
Martin DayAug 8, 2025
Why is my DREAM MULTIMEDIA Dreambox DM 600 PVR remote control not working?
- H
  Heather RoseAug 8, 2025
  There are several reasons why your DREAM MULTIMEDIA Receiver remote control might not be working. First, ensure the batteries are correctly inserted, paying attention to the polarity. If they are, try replacing them with new ones. Also, check that the remote is in the correct mode (Dream-Mode or TV-Mode) by pressing the corresponding button. Finally, if the software isn't responding, try rebooting your Dreambox.
T
Tonya DanielsAug 12, 2025
What to do if my DREAM MULTIMEDIA Dreambox DM 600 PVR does not react?
- C
  Christopher CarterAug 12, 2025
  If your DREAM MULTIMEDIA Receiver is not responding, it may be locked up. Try rebooting the Dreambox to resolve this.
M
Michael SantiagoAug 16, 2025
How to fix DREAM MULTIMEDIA Receiver when there is no audio or video but the LCD is lit?
- D
  Dawn GrahamAug 16, 2025
  If your DREAM MULTIMEDIA Receiver has no audio or video but the LCD is lit, consider these potential solutions: * Check the wiring and connections to ensure they are secure. * The LNB might be faulty, consider exchanging it. * Review your tuner settings to ensure they are correct. * Realign your dish, as it may be misaligned.
M
Melvin PetersAug 21, 2025
What to do if my DREAM MULTIMEDIA Dreambox DM 600 PVR Receiver shows beamlike blackouts in the video?
- N
  nathan18Aug 21, 2025
  Beamlike blackouts in the video on your DREAM MULTIMEDIA Receiver can be caused by several factors. If there's heavy rain or snow, remove the snow from the dish. Also, check the dish alignment and realign if necessary. The dish might be too small, consider installing a larger dish. Finally, check for any obstacles, such as a house or tree, that might be blocking the signal and reposition the dish for a clear view of the satellite.
M
michelletannerAug 26, 2025
Why does my DREAM MULTIMEDIA Dreambox DM 600 PVR Receiver have no reception on a channel that was working before?
- P
  popereginaldAug 26, 2025
  If your DREAM MULTIMEDIA Receiver suddenly has no reception on a channel that previously worked, the dish may be misaligned or faulty, so check the dish. Also, the channel may be transmitted in a new slot, so start a service scan. Finally, the transmission of the channel might have been terminated.
A
Amy Hood MDAug 29, 2025
What to do if I cannot record anything anymore on my DREAM MULTIMEDIA Dreambox DM 600 PVR Receiver?
- L
  ldavidAug 30, 2025
  If you can no longer record anything on your DREAM MULTIMEDIA Receiver, it is likely that the hard disk is full. Delete any recordings that are no longer needed.
A
Amy McguireSep 3, 2025
What causes no reception of channels like Sat1, Pro7, Kabel on DREAM MULTIMEDIA Dreambox DM 600 PVR, and how can I fix it?
- P
  Patricia LeeSep 3, 2025
  If you are experiencing no reception of channels like Sat1, Pro7, and Kabel on your DREAM MULTIMEDIA Receiver, it could be due to interference from a wireless DECT phone. Try increasing the distance between the phone’s base station and the Dreambox, or consider buying a coaxial cable with a higher shielding value.

DREAM MULTIMEDIA Dreambox DM 600 PVR Specifications

General

Type	Satellite Receiver
PVR Function	Yes
EPG	Yes
Operating System	Linux
RAM	64 MB
Modem	No
USB	No
Weight	1.5 kg
Tuner Type	DVB-S
Hard Drive	Optional (user-installed)
Smart Card Reader	1
DiSEqC	DiSEqC 1.0, 1.1, 1.2
Video Output	Composite, S-Video
Audio Output	Stereo
Ethernet	10/100 Mbps