Dream On Me 665 - User Manual

Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed are step by step instructions to help you.
quickly assemble your product.Before you begin we recommend
that you follow the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 665
1
s
Read all instructions before assembling crib.
Save instructions for future use.
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788

Summary

Assembly Instructions

Safety Warnings

Connection Hardware

Crib Assembly

Step 1

Connects changer rails to legs using bolts and dowels.

Step 2

Slides changer shelves into supports and side panel.

Step 3

Assembles the changer unit part C using previous steps' method.

Step 4

Attaches back bottom rail and legs to back rails using bolts.

Step 5

Step 6

Step 7

Step 8

Step 9

Converting Crib to a Toddler Bed

Furniture Tipping Deterrent Hardware

Dream On Me 665 Specifications

General

Brand	Dream On Me
Model	665
Category	Baby & Toddler Furniture
Language	English