22
EN
Routine Maintenance
Charging Contacts
Clean the charging contacts and the signaling area of the base station with a
soft, dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station with a soft, dry
cloth.
Mop Pad
Remove the mop pad from the mop pad holder to replace it.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of time,
turn it o and put it away. To prevent damages from over-discharging, charge
the robot at least once every three months.
Cleaner Adding Inlet
If the cleaner adding inlet is dirty, wipe it with a soft, dry cloth.
To Next Page
Loading...
Need help?
General
